Water that is injected later in the process is often not clean and may contain harmful substances, which can affect both taste and health. This contaminated water can lead to various illnesses if consumed. So, how can consumers tell the difference?
At a glance:
1. A genuine piece of lamb should have a purple quarantine seal from the animal husbandry department along with a valid inspection certificate. If there’s no such seal or certificate, it might be substandard.
2. Fresh lamb should have a bright red color, with a shiny surface and no liquid oozing out after cutting. However, water-injected lamb tends to look pale red, especially in the meat, while the fat appears dull and lifeless. When cut, it often releases a large amount of pale red liquid.
By touch:
Normal lamb will have minimal grease leakage at the cut surface, and when you press it with your finger, it feels slightly sticky. It should also have a natural, mild scent. On the other hand, water-injected meat feels slick and wet to the touch, with no stickiness and a strange, possibly sour smell.
By burning:
Take a small piece of paper towel and place it on the cut surface of the lamb for 5–15 seconds. If the paper gets wet, then try lighting it. If it burns completely without leaving any residue, it’s likely normal meat. If it doesn’t burn well or leaves behind a wet, smoky residue, it's probably water-injected meat.
These simple methods can help you identify whether the lamb you're buying is fresh and safe to eat, or if it has been tampered with by water injection. Always stay alert and check carefully before making a purchase.
LED Underwater Light
This classification mainly includes the aluminum or zinc casting parts using in LED Underwater Light area.
In the die casting process,higher specific pressure is required, so that higher filling speed can be obtained.which is beneficial for alloy to overcome mold filling resistance.and effectively fill each part of the cavity.The Casting General Tolerance is Grade GB-CT4.
Process Technology: High pressure die casting, NC Machining,Shot Blasting
Casting General Tolerance: Grade GB-CT4
Flow Processes: Die casting, Degating to remove the residual of the gate, Polishing and Deburring to remove the burrs, Polishing to remove the parting line, flash,CNC Turning, Cleaning, Packaging, Storaging, Shipping
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection, and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage, Screw Gauge
Application: Machinery Parts
Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Lead Time: 30-35 days
Trade Term: FOB Ningbo
Aluminum Die Casting LED Underwater Light Components,Zinc Casting Parts for LED Underwater Light,Die Casting LED Underwater Light Parts
NINGBO ZHENHAI BOLANG METAL PRODUCTS FACTORY , https://www.casting-part.com