Centrifuge rotor installed state
The state of the desktop high-speed centrifuge without the rotor
Select the rotor, insert the rotor hole into the motor shaft, and then use the matching Phillips screwdriver to introduce the hole from the rotor. The clockwise direction is the direction of the fixed installation of the rotor. The force is too strong to prevent damage to the instrument.
Rotate the screwdriver clockwise until you can't remember to use it.
This is installed, is it simple? The figure above shows the state of the centrifuge rotor installed.
The unloading process is the opposite of the installation process, and the screwdriver gently rotates counterclockwise.
The shape of the desktop high-speed centrifuge rotor after unloading, of course, this is the rotor of the desktop high-speed centrifuge, the other is similar, the principle is the same.
This article was originally created by a desktop high speed centrifuge
It adopts ultrasonic technique and full automation, it is for the last step of making a blank mask. By using ultrasonic technique, it welds elastic on the outer sides of mask. And pack the elastic ear-loop into the mask with non-woven strip. Then, a mask is finished. widely used in materials like PP, non-woven, melt-blown, filter paper, activated carbon etc. And occasions like work protection, normal protection, labor protection, hospital, research center and clean industry. According to different raw materials, it can reach N95, P2, P3 standard.
Ultrasonic Inner Ear-loop Welding Machine
inner ear-loop welding machine
Dongguan Huitong Automatic Machinery Technology Co., Ltd , https://www.medicalmaskmachines.com