1. Selection of Seed Coating Types
To ensure the effectiveness of seed coating in the region, appropriate seed coating agents were selected through community trials and field demonstrations. These trials helped identify the most suitable formulations that could enhance germination rates, protect seeds from pests, and improve overall crop performance under local conditions.2. Seed Quality Standards Before Coating
Before applying any coating agent, the seeds must meet specific quality standards: the original species purity should be at least 99%, seed purity no less than 95%, clarity above 99%, moisture content below 12%, germination rate over 80%, residual acid content not exceeding 0.15%, and breakage rate no more than 7%. These standards are essential to guarantee the success of the coating process and the health of the resulting plants.3. Seed Coating Methods
The coating process should strictly follow the manufacturer's instructions for the seed coating agents. Some agents do not include insecticides, such as 26% Morefoxrocide, which is ineffective against cotton seedling pests. In such cases, a phosphorus-based coating can be applied first, followed by drying and then a second coating with 26% Duofu Jiamu. The seeds are then bagged and ready for sowing. Another method involves mixing phorate and dofloxacin in a ratio of 0.3–0.4:1, applying the mixture directly to the seeds, and drying them before bagging. If a seed coating dryer is used, the coated seeds can be directly bagged for broadcasting.4. Quality Testing of Coated Seeds
Prior to coating, it’s crucial to test the seeds for germination rate, moisture content, residual acid level, and breakage rate to ensure they meet national seed quality standards. Only high-quality seeds can ensure the effectiveness of the coating agents. During the coating process, moisture levels should be monitored regularly. If the moisture exceeds the limit (12%), the seeds must be dried immediately. Additionally, each batch of coated seeds should be tested for germination, and the coating coverage and adhesion should be thoroughly inspected to ensure the final product meets all required quality specifications.By following these detailed steps and maintaining strict quality control, farmers can significantly improve the success rate of their crops, reduce pest damage, and achieve better yields.
The main products of basic chemical industry, such as hydrochloric acid, caustic soda, soda ash, ammonium chloride and chlorine gas, are mainly produced with industrial salt as raw materials. In addition, also used in soap manufacturing, ceramic, glass production, daily chemical, oil drilling, drilling fluid, completion fluid, petrochemical dehydrated liquid, early strength agent, construction industry in the production of coating latex coagulation agent, curing agent, rubber industry papermaking additives and waste paper deinking, chemical industry of inorganic chemical raw materials and sulfuric acid root removal agent, the curing agent of alginic acid sodium, the prevention and treatment of wheat, apple, cabbage, such as decay and preparing food preservatives, metallic sodium and other sodium compounds, such as steel heat treatment medium. Salt is also widely used in water treatment, road snow removal, refrigeration and refrigeration.
Exported Inorganic Salt,Industrial Sodium Chloride,Sodium Chloride For Pvc,Sodium Chloride For Pesticide
Xingbang High Molecular Materials Co., Ltd. , https://www.chemicaladditive.com