1. Lubricate and maintain the main and auxiliary auger bearings for every 8 hours of work.
2. Check, adjust and lubricate the drive chain every 25 hours, the chain clearance is 3 cm.
3. Lubricate and maintain the drive shaft every 50 hours of operation, each time the grease is 1-2.
4. Adjust the gap between the movable knife and the fixed knife every 200 hours of operation, the gap is 1 mm.
5. The hydraulic oil filter should be cleaned for 50 hours during the running-in period.
6. Clean the hydraulic oil filter every 400 hours of operation.
7. Work in the running-in period for 100 hours to replace the specified type of hydraulic oil and gear oil.
8. Replace hydraulic oil and gear oil every 800 hours of operation.
9. Winter oil should be selected according to the local temperature conditions, the hydraulic oil with relatively low viscosity.
10. The amount of hydraulic oil is about 24 liters, and the amount of gear oil is about 10.5 liters.