The disc dryer of Changzhou Erle Drying Equipment Co., Ltd. can improve its drying production capacity by adding fin heater, solvent recovery condenser, bag filter, dry material back mixing mechanism, induced draft fan and other auxiliary machines. Dry paste and heat sensitive materials, easy to recover solvent, and can carry out pyrolysis and reaction operations, manually adjust the height of the disc feeder to adjust the temperature of the heating plate.
(1) Easy regulation and applicability
The drying process is optimized by adjusting the thickness of the layer, the spindle speed, the number of arms, and the size of the 耙 leaf type.
Each layer of drying tray can be separately passed into a heat medium or a cold medium to heat or cool the material, and the temperature control of the material is accurate and easy.
The residence time of the material can be precisely adjusted.
The material flow direction is single, no back mixing phenomenon, uniform drying, stable quality, no mixing.
(2) Simple and easy to operate
The driving and parking operation of the dryer is very simple.
After the feed is stopped, the transfer material can quickly drain the material in the dryer.
The equipment can be carefully cleaned and observed through the special large-scale inspection door mirror.
(3) Low energy consumption
The material layer is very thin, the spindle speed is low, the system requires less power and less power consumption.
Drying with conduction heat, high thermal efficiency and low energy consumption.