Causes and troubleshooting of steel belt baler:
The steel belt manual baler is a new advanced pneumatic packaging machine for the baler. It is mainly used for steel and non-ferrous metal enterprises to bundle various small-sized pipes, plates, profiles and other products, and is also suitable for bundling various products in wooden boxes. However, due to wear and tear of the parts during use, poor lubrication may cause damage to the parts, which may increase the occurrence of malfunctions and accidents. Therefore, it is important to quickly find faults and eliminate faults. Don't ask the manufacturer for a little glitch, so you can win valuable time and money.
Here are a few of the places that are prone to failure and how to repair them.
Fault 1: Cut the steel strip.
Causes: 1) The cutter is worn or faulty. ★Maintenance method: Check whether the cutter or cutter holder is worn or faulty. If it is seriously worn, it should be replaced.
Reason: 2) The air pressure is lowered. ★Maintenance method: Check whether the working pressure is normal; cut the steel belt force; check the sealing operation.
Fault 2: The tension of the lock jaw is not enough.
Cause: The clamping block coupling hole or the coupling pin is worn. ★Maintenance method: Check these parts when the groove depth is shallow and replace if necessary.
Sunflower Seeds 601
Sunflower Seeds 601,Sunflower Seed A Tree Nut,Sunflower Seed Butter Nutrition,Sunflower Seed Calories
Bayannaoer City Chentai Industry and Trade Co.,Ltd , https://www.chentaifood.com