Any equipment needs to master the correct maintenance methods. The following is a brief introduction to the specific maintenance methods of the centrifuge:
1. Before the centrifuge is operated, the power should be cut off and the centrifuge brake should be loosened first. You can manually turn the drum to see if there is any bite. Pay attention to the looseness and abnormality of other parts.
2. Turn on the power and start the car in a clockwise direction. Usually, each device must be empty for about 3 hours after it arrives at the factory. It can work without abnormal conditions.
3. The material should be placed as evenly as possible. Must be operated by a person, the capacity must not exceed the rated amount.
4. Pay attention to the machine running at over speed, so as not to affect the service life of the machine.
5. After the machine is started, if there is an abnormal situation, it must be stopped to check and repaired if necessary.
6. The centrifuge is running at high speed, so it is not possible to touch the drum with the body to prevent accidents.
7. The mesh number of the filter cloth should be determined according to the size of the solid phase particles of the separated material, otherwise the separation effect will be affected. In addition, when installing the filter cloth, insert the filter cloth sealing ring into the drum sealing groove to prevent the material from running in.
8. To ensure the normal operation of the centrifuge, please rotate the parts every 6 months. At the same time, check the running lubrication condition of the bearing, whether there is wear phenomenon; whether the components in the brake device are worn or not, and whether the bearing cover has oil leakage.
9. After the machine is used, it should be cleaned and kept clean. Do not separate the non-preservative centrifuge from the highly corrosive materials; in addition, strictly follow the equipment requirements and regulations, and the non-explosion-proof centrifuge should not be used in flammable or explosive places. Guarantee personal safety.