Chengyufen raise and catch and sort matters

1. There are two methods for catching fish, catching fish, catching fish, and catching fish. In the larger ponds, net catches are generally used; in small fish ponds or concrete structures, pool water can be directly drained, and the catches can be placed in a set.é³— é³— cages.
Using the method of net catching, that is, feeding on feedstuffs in the food field, until most of the squid are concentrated in the food field, the net is used to surround the food field, and the net is set at the location of the food premises. Collect the caught squid in the long-distance collection box. The position of the long box should be on the side of the sampan pool for easy selection and installation, and install an aerator at 3 to 5 meters from the long box. When the squid is put into the long When the box is opened, the pool water is allowed to pass through the long box, so that the water inside and outside the box is continuously exchanged to avoid the lack of oxygen due to the dense squid and affect the division and maintenance operations. At the same time, it is necessary to continuously pull the nets to allow the catfish to move in the cage to prevent the catfish from squeezing and dying at the bottom of the net.
2. In summer and autumn, when the temperature is higher, the squid should be cooled with ice water. Generally, the temperature is controlled at 15 to 20°C. By cooling, the carp activity ability is significantly weakened. In this way, carcasses are not easily injured during sorting. The speed of sorting can also be accelerated.
3. The sorting procedure and method are generally selected by hand, and manual selection is performed on a singer. During sorting, the squid that has been cooled is poured into the collection tray of the sorter, and then the small sliding door on the side of the collection tray is opened so that the squid can swim slowly. The operator sorts according to the specifications required by the plan. The squid of each file size is collected through its own channel into the preset cages. In order to facilitate the squid swimming toward the cage, the divider should be slightly tilted toward the pond when it is mounted.
4. Several issues that should be paid attention to in the process of subsistence and breeding in Chengyu (1) The selection of cultivation and breeding should be carried out on rainy days. The weather in cloudy and rainy weather is low, and the air has high humidity. The carp is not easy to be injured during operation. When it is fine in summer, sub-cultivation should be carried out in the early morning or early evening. Do not operate in direct sunlight.
(2) Sorting and sorting strives to make the specifications neat, especially for the selection of exports, and the samples meeting the specifications can be pinned on the sorter for comparison by the operators.
(3) All operations in the sorting of the penultimate parent must be patient and careful, and light in action; avoid scratching the carcass during operation.
(4) After stocking and rearing, the stocking and stocking generally do not need to be disinfected. However, if there are obvious abrasions, diseases or transportation distances, the drug should be disinfected. In general, sulfa drugs are administered to eel for 3 to 5 days and the drug is incorporated into the feed.

KYLED500-22

LED-Q19

Germany imported beads

Imported French lens

mould Die-casting  Eight edge type Revolving arm

Optional emergency power supply≥3 hours

The main features:

1)Ideal cold light effects

Using the new LED cold light source, ensure energy saving and environmental protection and long service life up to 80,000hours and more.

The temperature increase of surgeon`s head below 1℃. LED do not engender infrared ray and ultraviolet radiation, without the temperature

rise and tissue damage caused by halogen shadowless light, also it can accelerate the wound healing after surgery, and without Radiation pollution.

With color temperature constant and soft, LED is very close to the sunshine.

1) Excellent shadowless effect

Lamp with the most scientific radian and Multi point light source design, ensure better uniform illuminance. When the lamps are partially occluded,

also can achieve perfect shadowless effect.Lamp panel radius of gyration ≥182cm, the lamp can be pulled to vertical floor, convenient to any angle illumination.

2) Excellent deep lighting

It is based on modularize method by Computer Aided Design, focused to irradiating with more beams of LED. It produces the deep lighting which beams

more than 1200cm,the illumination of center up to 180,000Lux or more, and offer the color temperature that can be adjusted from 3700K to 5000K which

is close to sunshine. Absolutely, it really reflects the color of human tissue and satisfied by all kinds of operating light needs.

3) Advanced control system

The use of liquid crystal display button control, to meet the needs of the medical staff of different patients with the brightness of the operation.

It offers illuminance memory function.

It does not effect using when a single circuit or one bulb is broken.

4) Universal suspension system

Rotating arm, a new type of alloy material is made of eight edge type.

Balanced system using imported arm module, more than 5 group universal joints, every cantilever must has more than 3 joints which can be rotated in 360°,

The structure is light, easy to manipulate, accurate positioning, can provide the maximum range of regulation.The equipped with fatigue correcting unit and

fix position hand handle device, easy to fix position after long time use.

5) Modern laminar lamp

The thickest part of lamp-chimney is not more than 10cm.

The lamp-chimney is made of ABS, The handle on the central of lamp can be detachable, can take high temperature (≤ 134°C) sterilization treatment,

easily adjust, flexible fixed.

Mobile Type Operating Light

Mobile Type Operating Light,LED Examination Light,Mobile Operation LED Light,Mobile Stand Operating Light

Shandong qufu healthyou Medical Technology co.,Ltd , https://www.kangerjian-medical.com