The gearbox of the tractor consists of a clutch pedal, a push rod, an interlocking shaft, a spring, a lock pin, a slide bar, and the like. Paying attention to the use and maintenance of these parts will not only prolong their service life, but also reduce many accidents. Ensure the normal operation of the locomotive. 1. When shifting gears, pay attention to the clutch on the way to the end, completely cut off the power, to prevent the gear from impacting and gearing when shifting gears to reduce gear damage. 2. When shifting gears, pay attention to pushing the shift lever into position so that the gears are all meshed so that the teeth do not become tapered and cause automatic gear shifts. 3. During the locomotive work, pay attention to the oil level and temperature of the gearbox and whether there is any abnormal noise. If the shell temperature is higher than 70°C--80°C, it means that some parts of the gearbox are not working properly, and should be stopped to check and eliminate. 4. When the wheel-type tractor is shifting gears in progress, when shifting high gears to lower gears, attention should be paid to the combination of operating skills and accelerator speeds to prevent gearing. 5. In winter, the viscosity of the gear oil is large, so be careful not to add a load or high-speed driving at a low temperature, so as to avoid poor lubrication and to accelerate the wear of the parts or damage the gears. 6. When the gear is engaged, if the clutch is still difficult to file after the clutch is completely disengaged, it is because the gear teeth of one gear in the gearbox face the gear teeth of the other gear. At this time, pay attention to slightly lift the clutch pedal, let the gear turn a certain angle, and then separate the clutch and re-file. Must not force file, so as not to damage the gear. 7. Be careful to check fasteners and operating mechanisms frequently, and tighten them at any time. 8. Note that different lubricants are used in winter and summer. The gearbox should be cleaned once every 500 hours of operation and replaced with new gear oil. Pay attention to the cleanliness of the oil when refueling, release the gear oil while hot, then add the new diesel, idle for 2 minutes at low speed. In 3 minutes, the net diesel is finally put and new gear oil is added.
Flower
Tea
GanoHerb has now developed a new Flower Tea
line to help you prepare for hot summer. The ingredients we used for the flower
tea products are 100% natural with no additive whatsoever. For example, for the
lemon tea, we used pure freshly dried lemon slices in order to maximize the
fresh lemon flavor as well as to keep the nutrition inside. Besides that, we
also have rose tea, goji berry tea, hawthorn tea, chrysanthemum tea etc. All of them are
delicious and easy to make. Simply put the content into a teapot and add boiling
water. Within minutes, a pot of delicious flower tea will be ready for you. If
you use a transparent glass teapot, you can enjoy watching the flower booming
in water. You can also mix some of them together to create your own unique
flower tea.
There are plenty of health benefits you can
get from drinking flower tea. They are all very good source of antioxidant,
therefore they can prevent cell damage from free radicals. Also, each flower
tea has its unique function. For example, rose tea is good for your skin, and chrysanthemum is a effective anti-inflammatory agent and immunity booster, goji berries, on
the other hand, help regulate blood sugar and testosterone. Go ahead and make
yourself some fresh flower tea, which will not only give you a fresh and
delicious taste, but also bring you great health benefits.
Flower Tea
Flower Tea,Organic Flower Tea,Handcrafted Flower Tea,Chamomile Flower Tea
Ganoherb International Inc , http://www.ganoherb.com